However, after some thinking I've come to the conclusion that there's no point in continuing.
I don't have any PAL games apart from SM64, and with Everdrive 64 my NTSC N64 will boot anything I'll throw at it.
There's simply no need for stuff this complicated.

I think something based on ATTiny would be much better. After all, all it needs to do is just to read the reset button on power on and switch the clock synthesizer and video encoder to PAL/NTSC accordingly.

Show thread

Well, it's been a while.
The new board revision works fine. The console actually boots properly, with controllers and controller paks working just fine. The DualPIF PCB itself fits quite nicely inside the metal shield.
Here I should probably say that all that's left is to write the firmware and get the NTSC PIF soldered to the DualPIF PCB.

Just ordered a new revision of adapter. This time I decided to go with SMD pads on the bottom.

There should be enough space to solder it with the soldering iron. In the worst case, I'll just use my hot-air station.

Got the adapters yesterday.
That's basically the only nice thing about them.

Castellated holes turned out to be a pretty bad idea. No matter how clean the soldering is, I'm getting shorts between neighbouring half-holes. I guess I should've gone with plated holes of a larger diameter instead.

Back to the drawing board...

Ivan :archlinux: boosted

Set your clocks and ready your webmail browser tabs!

The starts shipping tomorrow!

Finally got the 4-layer 0.8mm PCBs from JLCPCB for my DualPIF project. Looks like they turned out okay!
All that's left is to wait for the PIF adapter PCB from OSHPark to arrive and write the firmware for onboard ATmega controller, and it'll be ready to test.

Ivan :archlinux: boosted

@gxtony Haha, thanks!
This is LG 27UK850, really happy with it.

Ivan :archlinux: boosted
Ivan :archlinux: boosted

Just finished installing RGB amplifier by borti4938/VideoGamePerfection into my NTSC-J N64.
Really happy with the quality. It looks much better than RGB from my N64RGB-modded PAL N64.

Next on the list is my own Dual PIF mod. Hope 4-layer board I ordered from JLCPCB will turn out okay...
#N64 #Nintendo64


Fosstodon is an English speaking Mastodon instance that is open to anyone who is interested in technology; particularly free & open source software.